Machinery > Cold Saws > MEP

Hyd Mech
Friggi
F.M.B.
Tannewitz
Macc
OMGA
Simec
Häberle
MEP    New!
Euring
Starbend
Numalliance
S.M.I.    New!
Hydroil
Sergi
Sertom
Davi
Brushtec
Propen

  MEP

  Serie Tiger
  350
  350 SX
  350 AX
  350 CNC

  Serie Falcon
  275
  315

  Serie Cobra
  350
  350 SX
  350 AX
  350 CNCFE



 

FALCON 275

Manual sawing machine to cut metals from 45 right up to 45 left using an HSS blade. This high performance model has a heavy cast iron structure and is equipped with all the devices and functions necessary so as to cut in a precise and safe manner.

The FALCON 275 is available as a bench model or eventually with the steel base which is an optional. Furthermore it can be supplied with three-phase motor at one or two speeds, or in the single-phase version.


Compliance

Function


    A FEW FEATURES:
  • Electric panel (wiring totally identifiable, stand-by, main lockable disconnect switch, pole change switch, emergency stop, motor magneto thermal overload, minimum tension coil, protection against missing phase, low tension safety device 24V).
  • Blade shaft assembled on spheroidal cast iron eccentric bushing.
  • Double head return spring.
  • Bronze gear mounted with key and ring nut so as to grant the maximum hold.
  • Worm screw shaft mounted on a pair of bearings.
  • IP55 control handle.
  • Clamping system by means of vice screw which slides on taper slide with adjustable gib.
  • The front vice jaw has an axial adjustment so as to clamp the material as close as possible to the cutting line.
  • Adjustable steel anti-burr device.
  • Electric submerged pump at 48V to lubro-refrigerate blade.
  • Double head return spring.
  • Adjustable cut to measure stop to make cuts of the same length.
  • Machine is predisposed to be hoisted.
  • Service keys and instructions manual, for maintenance and spare parts list.
    OPTIONALS:
    Optionals upon request:
  • Steel base.
  • Tubular steel base.
  • Cut to measure stop with millimetered scale
  • Circular Blade HSS DMO 5 275x32x2 mm for thin sections
  • Circular Blade HSS DMO 5 250x32x2 mm for sections
  • Circular Blade HSS DMO 5 225x32x2 mm for solids
  • Adapter for unloading tables
  • Adapter for loading tables
  • Emulsible oil Lt. 5
  • Roller tables:
    - K35 loading series (componable modules 1500 mm)
    - K35 unloading series (componable modules 1500-3000-4500-6000 mm)