Machinery > Cold Saws > MEP

Hyd Mech
Friggi
F.M.B.
Tannewitz
Macc
OMGA
Simec
Häberle
MEP    New!
Euring
Starbend
Numalliance
S.M.I.    New!
Hydroil
Sergi
Sertom
Davi
Brushtec
Propen

  MEP

  Serie Tiger
  350
  350 SX
  350 AX
  350 CNC

  Serie Falcon
  275
  315

  Serie Cobra
  350
  350 SX
  350 AX
  350 CNCFE



 

FALCON 315

Manual sawing machine to cut metals from 45 right up to 45 left using an HSS blade. This high performance model has a heavy cast iron structure and is equipped with all the devices and functions necessary so as to cut in a precise and safe manner.

The FALCON 315 is available as a bench model or eventually with the steel base which is an optional, with a 2 speed motor. Furthermore upon request it can be supplied with an automatic vice (FALCON 315MA) so that the vice closes automatically when lowering the head. In the MA version the machine is always supplied complete with steel base.


Compliance

Function


    A FEW FEATURES:
  • Electric panel (wiring totally identifiable, stand-by, main lockable disconnect switch, pole change switch, emergency stop, motor magneto thermal overload, minimum tension coil, protection against missing phase, low tension safety device 24V).
  • Motor insulation class IP54.
  • Blade shaft assembled on two preloaded taper bearings on eccentric bushing.
  • Externally adjustable clutch.
  • Worm screw shaft mounted on a pair of bushings.
  • Clamping system by means of vice screw which slides on taper slide with adjustable gib.
  • Fixed burnished steel jaws.
  • The front vice jaw has an axial adjustment so as to clamp the material as close as possible to the cutting line.
  • Adjustable steel anti-burr device.
  • Electric submerged pump at 48V to lubro-refrigerate blade.
  • Double head return spring.
  • Adjustable cut to measure stop to make cuts of the same length.
  • Stock support arm with roller predisposed to mount loading table.
  • Machine is predisposed to be hoisted.
  • Service keys and instructions manual, for maintenance and spare parts list.
    OPTIONALS:
    Accessory to be requested only when placing order:
  • Spindle speed 60/120 rpm instead of standard 30/60 rpm.


  • Optionals upon request:
  • Steel base (only for 315 version with manual vice).
  • Cut to measure stop with millimetered scale
  • Circular Blade HSS DMO 5 315x32x2,5 mm for thin sections
  • Circular Blade HSS DMO 5 300x32x2,5 mm for sections
  • Circular Blade HSS DMO 5 250x32x2 mm for solids
  • Adapter for unloading tables
  • Emulsible oil Lt. 5
  • Roller tables:
    - K35 loading series (componable modules 1500 mm)
    - K35 unloading series (componable modules 1500-3000-4500-6000 mm)