Machinery > Cold Saws > MEP

Hyd Mech
Friggi
F.M.B.
Tannewitz
Macc
OMGA
Simec
Häberle
MEP    New!
Euring
Starbend
Numalliance
S.M.I.    New!
Hydroil
Sergi
Sertom
Davi
Brushtec
Propen

  MEP

  Serie Tiger
  350
  350 SX
  350 AX
  350 CNC

  Serie Falcon
  275
  315

  Serie Cobra
  350
  350 SX
  350 AX
  350 CNCFE



 

TIGER 350CNC

Automatic/semi-automatic electropneumatic vertical CNC sawing machine with microprocessor to cut from 60 left up to 45 right.

Machine with controlled double axis multimicroprocessor so as to obtain, on the same bar, 32 different lots, each of different lengths and quantities.


Compliance

Function

NC


    A FEW FEATURES:
  • Head moves vertically on prismatic guides with adjustable taper gib.
  • Double set of gears so as to obtain a high performance.
  • Four speed rotation of the blade: 2 speeds by electric motor and 2 speeds with mechanical shift.
  • Pneumatic vertical vice.
  • Control and programming panel with graphic LCD display with autodiagnostic messages.
  • Regulation head stroke according to dimensions of material which has to be cut, is programmed from control panel.
  • Barfeed is obtained by means of screw/nut with recirculating ballscrews with D.C. motor.
  • The feeder carriage is mounted, by means of sleeves with recirculating ballscrews, on guided and hardened steel guides.
  • Adaptive shearing stress control system.
  • Wire chip brush for blade cleaning.
  • Filter to avoid dissipation radio interferances along line.
  • Flashing indicator light in case machine is stopped.
  • Control panel fitted inside frame with total protection against electromechanic or electric phenomenons.
  • Whole strong structure in electrowelded steelwork predisposed for handling with movement equipment.
  • Circular blade HSS DMO 5 350x32x2.5 for solids or sections.
  • Predisposed to mount loading table.
  • Service keys, instructions manual for maintenance and spare parts list.
    OPTIONALS:
    Accessory to be requested only when placing order:
  • Digital redout of cutting lenght set 0,1/500 mm.
  • Set of "comb jaws" for bundle cutting (max mm 70x70).
  • Special vice to reduce restpiece.
  • Set of "comb jaws" (max mm 70x70) when equipped w/restpiece reduc.
  • Spindle speed 30/60/90/180 rpm instead of standard 15/30/45/90 rpm.
  • Supplementary foot-pedal control w/emergency stop.


  • Optionals upon request:
  • Supplementary pneumatic vice.
  • Loading table K35 for "comb jaws" (componable modules 1500 mm).
  • Circular Blade HSS DMO 5 350x32x2,5 mm for solids and section
  • Adapter for unloading tables
  • Emulsible oil Lt. 5
  • Roller tables:
    - K35 loading series (componable modules 1500 mm)
    - K35 unloading series (componable modules 1500-3000-4500-6000 mm)